GW Instek GLA-1000 Series User Manual - Manual (Page 5)

Safety Instructions
5
Safety Instructions
This chapter contains important safety instructions that must be
followed when operating GLA and when keeping it in storage.
Read the following before any operation to insure safety and to
keep the best condition for GLA.
Symbols and Guidelines
Symbol
CAUTION
Caution symbol identifies conditions or practices that could result
in damage to GLA or to other properties.
General
Guideline
CAUTION

Do not place any heavy object on GLA.
 Avoid severe impacts or rough handling that leads to damaging
GLA.

Do not discharge static electricity to GLA.

Do not disassemble GLA unless you are qualified as service
personnel.
Cleaning GLA 
Use a soft cloth dampened in a solution of mild detergent and
water. Do not spray any liquid into GLA.

Do not use chemicals or cleaners containing harsh materials
such as benzene, toluene, xylene, and acetone.
Operation
Environment
WARNING
Location: Indoor, no direct sunlight, dust free, almost
non-conductive pollution (Note below)

Relative Humidity: < 80%
 Altitude: < 2000m
 Temperature: 0°C to 50°C
Storage
Environment
Location: Indoor

Relative Humidity: < 80%

Temperature: −40°C to 80°C