GW Instek GLA-1000 Series User Manual - Manual (Page 17)

GLA Overview
17
Expand the bus. — — Bus/Signal→Expand
Collapse the bus. — — Bus/Signal→Collapse
Automatically adjust the channel row
width (only in listing mode)
— — Bus/Signal→Format
Row→Auto Size
Move the cursor up. Up — Bus/Signal→Format
Row→Move Up
Move the cursor down. Down — Bus/Signal→Format
Row→Move Down
Hide the signal/bus. — — Bus/Signal→Format
Row→Hide
Show all the signal/bus. — — Bus/Signal→Format
Row→Show All
Set the signal/bus color. — — Bus/Signal→Format
Row→Color
Rename signal or bus. — — Bus/Signal→Rename
Trigger menu
Description Shortcut Icon Menu
Open the Bus trigger setup dialogue
window. — Trigger→Bus
Open the Signal trigger setup
dialogue window. — Trigger→Signal
Open the General trigger properties
dialogue window. — Trigger→Properties
Change signal trigger condition. Space — Trigger→…
Run/Stop menu
Description Shortcut Icon Menu
Single run. F5 Run/Stop→Single Run
Continuous run. F6 Run/Stop→Repetitive
Run
Stop running. F7 Run/Stop→Stop
Data menu
Description Shortcut Icon Menu
Go to the next data page. PageDown — —
Go to the previous data page. PageUp — —
Go to the beginning of data. Home — —
Go to the end of data. End — —
Move the waveform position right. Right — —