GW Instek GLA-1000 Series User Manual - Manual (Page 44)

GLA User Manual
44
Delete
Bus/Signal
Select the target signal/bus and click either:
Delete Bus/Signal – the selected single bus or signal. Or
Delete All – all buses and signals.
Restore Default
Restores the default status (all channels are active).
Group/Ungroup
Group signals into bus, or ungroup a bus into signals.
Menu
→ (group)
→ (ungroup)
Shortcut keys
Ctrl+G (group)
Ctrl+U (ungroup)
Method1
Open the Channels setup dialogue window, select the grouped
signals and press Ok. The following example shows that
ChannelD0 ~ D3 are grouped into D0 bus.
Channel Setup dialogue Result
Method2
In the main display, select the range of signals by pressing the Shift
key and clicking the signal names. Then choose Bus/Signal →
Group. A bus named Busx (x stands for 1, 2, 3…) is formed. To
ungroup the bus, choose Ungroup from Bus menu.