Ampro Corporation Single Board Computer 700 - Manual (Page 25)

ReadyBoard 700 Reference Manual 19
Chapter 3 Hardware
Overview
This chapter discusses the chips and features of the connectors in the following order:
•
CPU (U4)
•
Memory (DIMM1)
•
PC/104-Plus (J12A, B, C, D)
•
PC/104 (J13A & B, J14C & D)
•
IDE Interfaces (J22)
•
CompactFlash Adapter (J23)
•
Floppy /Parallel Interface (J20)
•
Serial Interfaces (J5A/B, J3A/B)
•
USB (J15A/B, J21A/B)
•
Ethernet Interfaces (J10, J11)
•
Audio Interface (J19)
•
Video Interfaces (J8, J9, J7)
•
Miscellaneous
♦ Utility Interfaces (J18)
♦ Reset Switch (SW1)
♦ Keyboard/Mouse (J16)
♦ Infrared (IrDA) Port (J17)
♦ Real Time Clock (RTC)
♦ Oops! Jumper (BIOS Recovery)
♦ User GPIO signals (J2)
♦ Temperature Monitoring
♦ Serial Console
♦ Watchdog timer
•
Power Interface (J4, J6)
NOTE Ampro Computers, Inc. only supports the features/options tested and listed in this
manual. The main integrated circuits (chips) used in the ReadyBoard 700 may
provide more features or options than are listed for the ReadyBoard 700, but
some of these chip features/options are not supported on the board and may not
function as specified in the chip documentation.