Ampro Corporation Single Board Computer 700 - Manual (Page 83)

Appendix B LAN Boot Option
ReadyBoard 700 Reference Manual 77
PXE Boot Agent Setup Screen
Use cursor keys to edit: Up/Down change field, Left/Right change value
Esc to quit; F9 restore previous settings, F10 to save
Argon Managed PC Boot Agent (MBA) v4.31 (BIOS integrated)
(C) Copyright 2002, Argon Technology Corporation
(C) Copyright 2003, 3COM Corporation
All rights reserved
Configuration
Boot Method: PXE
Default Boot: Local
Local Boot: Enabled
Config Message Enabled
Message Timeout 3 seconds
Boot Failure Prompt:
Wait for timeout
Boot Failure: Next boot device
Figure B-1. PXE Agent Boot Setup Screen
•
PXE Configuration
♦ Boot Method: – [PXE], [TCP/IP], [NetWare], or [RPL]
♦ Default Boot: – [Local] or [Network]
♦ Local Boot: – [Disabled] or [Enabled]
♦ Config Message: – [Disabled] or [Enabled]
♦ Message Timeout: – [3 seconds], [6 seconds], [12 seconds], or [Forever]
♦ Boot Failure Prompt: – [Wait for timeout] or [Wait for key]
♦ Boot Failure: – [Next boot device] or [Reboot]
•
TCP/IP Configuration
♦ Boot Method: – [PXE], [TCP/IP], [NetWare], or [RPL]
♦ Protocol: – [DHCP] or [BOOTP]
♦ Default Boot: – [Local] or [Network]
♦ Local Boot: – [Disabled] or [Enabled]
♦ Config Message: – [Disabled] or [Enabled]
♦ Message Timeout: – [3 seconds], [6 seconds], [12 seconds], or [Forever]
♦ Boot Failure Prompt: – [Wait for timeout] or [Wait for key]
♦ Boot Failure: – [Next boot device] or [Reboot]