Ampro Corporation Single Board Computer 700 - Manual (Page 52)

Chapter 3 Hardware
46 Reference Manual ReadyBoard 700
Video Interfaces (J8, J9, J7)
The VT8606 chip provides the graphics control and video signals to the traditional glass CRT monitors
and the LCD and LVDS flat panel displays. The chip features are listed below:
CRT features:
•
Supports a max resolution of 1600 x 1200 with video frame buffer set at 8MB
•
Supports a maximum allowable video frame buffer size of 32MB UMA (Unified Memory
Architecture)
•
AGP 4x graphics (always enabled)
•
Compliant with Rev 2.0 of AGP Interface
Flat Panel features:
•
Supports (3.3V, 5V, or 12V) output to both DSTN and TFT flat panels through a 36-bit interface
•
Supports TFT panel sizes from VGA (320x480) up to SXGA+ and UXGA+ (1400x1050).
•
Supports LCD VGA and SVGA panels with 9-, 12-, 18-bit interface (1 Pixel/Clock)
•
Supports UXGA and SXGA active matrix panels with 1x24-bit interface (2 Pixels/Clock)
•
Supports 1 or 2 channel LVDS outputs
CRT Interface (J8)
Table 3-20. CRT Interface Pin/Signal Descriptions (J8)
Pin # Signal Description
1 RED Red – This is the Red analog output signal to the CRT.
2 GREEN Green – This is the Green analog output signal to the CRT.
3 BLUE Blue – This is the Blue analog output signal to the CRT.
4 NC Not connected
5 GND Digital Ground
6 GND Digital Ground
7 GND Digital Ground
8 GND Digital Ground
9 NC Not connected
10 GND Digital Ground
11 NC Not connected
12 DDDA Display Data Channel Data – This signal line provides information to the CPU
through the Northbridge about the monitor type, brand, and model. This is part
of the Plug and Play standard developed by the VESA trade association.
13 HSYNC Horizontal Sync – This signal is used for the digital horizontal sync output to
the CRT.
14 VSYNC Vertical Sync – This signal is used for the digital vertical sync output to the CRT.
15 DDCLK Display Data Channel Clock – This signal line provides the data clock signal to
the CPU through the Northbridge from the monitor. This is part of the Plug and
Play standard developed by the VESA trade association.
Notes: The shaded area denotes power or ground.