HT instruments PQA824 User Manual
Page 61
PQA400 - PQA823 - PQA824
EN - 60
to define and save the configuration name by user. At the end of these operations the
following screen is shown by meter:
12/09/2006 – 16:55:10
PREDEFINED CONFIGURATIONS
Typical Configuration
EN50160
VOLTAGE ANOMALIES
HARMONICS
INRUSH
POWER & ENERGY
GENERIC PLANT
ADD
REM
Fig. 113: Typical customized configuration screen
In the example of Fig. 113 the typical customized configuration called “GENERIC PLANT”
was defined and can be loaded by pressing the SAVE or ENTER keys (or the smart icon
). This configuration cab be removed in any time by pressing F2 key (or the REM at display).
The warning message “Delete selected configuration?” is shown by meter. Press “Ok” to
complete the operation. Please note that the 5 predefined configuration and the DEFAULT
configuration cannot be removable by user.
Press ESC (or the smart icon ) to quit without saving any modify. Below the selected
parameters for each of predefined configuration are shown: