INOR PROFIPAQ-L - Manual (Page 30)

30
There is also some diagnostic information and extended diagnostic information (the
extended information is only available if the profile ident is selected to Manufacture).
Status (Hex)
Description
0x10 Memory Error
0x20 Failure in measurement
Table 5 DIAGNOSIS(0)
Status (Hex)
Description
0x08 Warmstart carried out
0x10 Coldstart carried out
0x80 IDENT_NUMBER_Violation
Table 6 DIAGNOSIS(1)
Status (Hex)
Description
NOT_USED
Table 7 DIAGNOSIS(2)
Status (Hex)
Description
0x80 Extension available
Table 8 DIAGNOSIS(3)
Status (Hex)
Description
0x01 RJ Error
0x20 Sensor aging
0x40 Memory error
0x80 Sensor isolation
Table 9 DIAGNOSIS_EXTENSION(0)
Status (Hex)
Description
0x01 Underrange
0x02 Overrange
0x04 Lead
breakage
0x08 Short breakage
Table 10 DIAGNOSIS_EXTENSION(1) channel 1
Status (Hex)
Description
0x01 Underrange
0x02 Overrange
0x04 Lead
breakage
0x08 Short breakage
Table 11 DIAGNOSIS_EXTENSION(2) channel 2