In-Situ Con TROLL PRO Operators Manual (purchased after 10 May 2012) - Manual (Page 11)

800-446-7488 11 www.in-situ.com
On-Screen Icon Descriptions
Error with parameter
or
RDO PRO (RDO Classic Sensor Cap) has expired.
Error with parameter
Calibration nominally stable
View
Bluetooth wireless technology turned on
Communication ongoing
View locked
View is not locked
Level or Aqua TROLL: Factory calibration has expired.
RDO PRO-X: RDO-X Sensor Cap has exceeded its
recommended service period, or the cap has sustained
significant abrasion and should be replaced.
User calibration has expired, based on the "Calibrate
Interval"
Depth of water
Level—Depth to water
Level—Surface elevation
Probe A not communicating
Probe B not communicating
Relay 1 active
Relay 2 active
Table 2. Icons and their descriptions
Setting the Log Interval
The log interval specifies how often the Con TROLL PRO logs data from the probes. On
the DC-L model, the log interval also sets the interval that the controller checks the
probes and updates the configured outputs when the display is off.
1. From the main screen, select Menu, Settings, Log Interval.
2. Select the desired interval and select Enter.