In-Situ Con TROLL PRO Operators Manual (purchased after 10 May 2012) - Manual (Page 7)

800-446-7488 7 www.in-situ.com
Menu Diagram
Figure 1.2 ConTROLL PRO Menu Diagram
Initial Configuration
Enter the following information upon first use or anytime after you have restored the
default settings on the controller.
1. Use the arrow keys to move up or down to the appropriate language. Select Enter to
accept the language.
2. Use the arrow keys to adjust the Contrast level. Select Enter to accept the contrast.
3. Refer to Table 1 to determine your UTC value (Universal Coordinated Time,
formerly GMT).
a. Choose the appropriate time zone as shown in the table.
b. Find the corresponding time zone number.
c. Use the Up/Left arrow key to enter a positive or negative value.
d. Press the Down/Right arrow key to move the appropriate numeric
position.
e. Use the Up/Left arrow key to enter the correct numeric value. Repeat
for additional digits as needed.
f. Press Enter to accept the time.
Region UTC Value (± numeric value)
Australia Northern Territory +9.5
Australia Lord Howe Island +10.5 (Daylight saving time +11)
Australia New South Wales +10 (Daylight saving time +11)
Australia Queensland +10
Australia Victoria +10 (Daylight saving time +11)
Table 1. Selected regions and their time in UTC