Changing the auto-off time (dc-l model only), Changing the language – In-Situ Con TROLL PRO Operators Manual (purchased after 10 May 2012) User Manual
Page 10
800-446-7488
10
www.in-situ.com
l
ON—The back-light stays on continuously.
l
Interval—The back-light stays on for the specified interval after the last keyboard
activity and then turns off. Press any key to turn the back-light on again.
Changing the Auto-Off Time (DC-L Model Only)
To conserve power, you can set the display to turn off after the keypad has not been
used for a certain length of time.
1. From the main screen, select Menu, Settings, Display, Auto-off.
2. Select the desired option and press Enter.
l
OFF—The Auto-Off feature is disabled. The display is continuously on.
l
Interval—The display stays on for the specified interval after the last keyboard
activity and then turns off. Press any key to turn the display on again.
Measurement and control continue at the programmed log interval
even while the display is off.
Changing the Language
1. From the main screen, select Menu, Settings, Display, Language.
2. Use the arrow keys to display a language.
3. Select Enter to save the setting.