In-Situ Con TROLL PRO Operators Manual (purchased after 10 May 2012) - Manual (Page 13)

800-446-7488 13 www.in-situ.com
3. When pairing between the controller and the Bluetooth device is successful the
controller screen will show “Pairing Successful.”
4. Select OK.
After a device is paired with the Con TROLL PRO, it can connect to the Con TROLL
PRO any time Bluetooth is turned on.
Administrator and Password Access
You may set up the controller with passwords for an administrator and a single user.
The User can access the Calibrate, Log Data, Hold Outputs, and Diagnostics menus.
The Administrator can access all functions, most notably, the Settings menu. If there is
no administrator code set, the User becomes the default Administrator and can access
all functions. To remove pass code-protected access, enter “0000” for all codes.
1. From the main screen, select Menu, Settings, Security Code, Administrator.
2. Set a 4-digit code for the Administrator using the arrow keys. Select Enter.
3. Select User. Set a 4-digit code for the User using the arrow keys. Select Enter.