Jenway 7305 - Manual (Page 26)

SeCtion 7 – Printing and Autologging
The utility toolbar in the expanded operating menu provides access to printing, print setup options, and
autologging options.
7.1 PRintinG
The utility toolbar in the expanded operating menu
enables results to be printed and print setup options to
be set. The print setup menu enables the destination of
the printouts and language of the printouts to be set.
7.1.1 PRint SetUP
To open the print setup menu hold the key adjacent to
the
printer icon for 2 seconds in the expanded operating
menu.
To select the language for the printouts press the key
adjacent to
English icon. Repeat pressing of the key
cycles the language between English, Français, Deutsche,
Espânôl and Italiano.
The destination of the printouts can be the internal printer or an external serial printer. The results can
only be sent to an external serial printer if there is a serial printer connected to the instrument via the
RS232 serial port. Press the key adjacent to the
computer icon to select the external printer. The results
can only be sent to the internal printer if there is an internal printer connected. To select the internal
printer for the printout destination press the key adjacent to the
printer icon.
Once the required printout destination and language has been selected press the key adjacent to the
tick icon to save and return to the expanded operating menu.
0.000
0.000
600
09:02
ppm
ABS
nm
0002x
003s
Print/print settings
Autolog menu
Fig 7.1 - Expanded Operating Menu
0.000
0.000
600
09:02
ppm
ABS
nm
0002x
003s
0.000
0.000
600
09:02
ppm
ABS
nm
0002x
003s
English
26