Jenway 7305 - Manual (Page 6)

6
6.3.2 Calibrating to a factor 25
6.4 Sample measurement 25
6.4.1 Measuring a sample after calibrating to a standard 25
6.4.2 Measuring a sample after calibrating to a factor 25
SeCtion 7 – PRintinG AnD AUtoLoGGinG 26
7.1 Printing 26
7.1.1 Print Setup 26
7.1.2 Printing Results 27
7.2 Autologging 27
7.2.1 Setting the Number of Sample Repetitions 27
7.2.2 Selecting Result’s Destination 28
7.3 Connecting to a PC 28
SeCtion 8 - Accessories and spare parts 29
8.1 Optional accessories 29
8.2 Connecting the accessories 29
8.2.1 Internal printer 29
8.2.2 Passive accessories 30
8.2.3 Active accessories 30
8.2.3.1 Automatic 8 cell turret 31
8.2.3.2 Peltier 31
8.2.3.3 Sipper pump 32
8.2.3.4 Combined sipper peltier pump 33
8.3 Using the accessories 34
8.3.1 Automatic 8 cell turret 34
8.3.2 Peltier 34
8.3.3 Sipper pump 35
8.3.3.1 Manual sipper pump settings 35
8.3.3.2 Timed sipper pump settings 36
8.3.4 Combined sipper peltier pump 38
8.4 Spares 39
SeCtion 9 - Maintenance and service 40
9.1 Routine maintenance 40
9.2 Lamp replacement 40
9.2.1 Tungsten halogen lamp replacement 40
9.2.2 Xenon lamp module replacement 40
9.3 Service 41
SeCtion 10 - troubleshooting 42
10.1 Error codes 42
10.2 Troubleshooting guide 44
10.3 Technical support 44
SeCtion 11 - Declaration of conformity 45
SeCtion 12 - Glossary of icons 47
index 54