Asus 1U Rackmount Barebone Server RS160-E3/PS4 - Manual (Page 21)

2 - 3 2 - 3 2 - 3 2 - 3 2 - 3 A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4
2.1.3 2.1.3 2.1.3 2.1.3 2.1.3 Installing the cover Installing the cover Installing the cover Installing the cover Installing the cover
1. Position the cover on top of the
chassis with the thumbscrews on
the rear, and leaving a gap of about
half an inch from the front panel.
3. Slide the cover toward the front until it snaps in place.
4. Tighten the thumbscrews on the rear to secure the cover.
2. Make sure that the side
markings on the cover (two on
each side) are aligned to the
grooves on the chassis.
G r o o v e s G r o o v e s G r o o v e s G r o o v e s G r o o v e s
S i d e m a r k i n g s S i d e m a r k i n g s S i d e m a r k i n g s S i d e m a r k i n g s S i d e m a r k i n g s
T h u m b s c r e w s T h u m b s c r e w s T h u m b s c r e w s T h u m b s c r e w s T h u m b s c r e w s
2. Firmly hold the cover and slide it toward the rear panel for about half an
inch until it is disengaged from the chassis.
3. Lift the cover from the chassis.
1 / 2 i n c h 1 / 2 i n c h 1 / 2 i n c h 1 / 2 i n c h 1 / 2 i n c h
d i s t a n c e
d i s t a n c e d i s t a n c e d i s t a n c e d i s t a n c e