Asus 1U Rackmount Barebone Server RS160-E3/PS4 - Manual (Page 25)

2 - 7 2 - 7 2 - 7 2 - 7 2 - 7 A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4
2.3.2 2.3.2 2.3.2 2.3.2 2.3.2 Memory configurations Memory configurations Memory configurations Memory configurations Memory configurations
You may install 256 MB, 512 MB, 1 GB, and 2 GB registered ECC DDR2 DIMMs
into the DIMM sockets.
®
PVL-D/1U/SCSI
DIMM_A1
DIMM_B1
PVL-D/1U/SCSI 240-pin DDR2 DIMM sockets
DIMM_A2
DIMM_B2
DIMM_A3
DIMM_B3
DIMM_A4
DIMM_B4
112 Pins 128 Pins
Mode DIMM_B4 DIMM_A4 DIMM_B3 DIMM_A3 DIMM_B2 DIMM_A2 DIMM_B1 DIMM_A1
Single-channel
Dual-channel
Populated with DIMM
2.3 System memory
2.3.1 2.3.1 2.3.1 2.3.1 2.3.1 Overview Overview Overview Overview Overview
The motherboard comes with eight Double Data Rate 2 (DDR2) Dual Inline
Memory Modules (DIMM) sockets to support 240-pin DDR2 modules.
The figure illustrates the location of the DDR2 DIMM sockets:
• Always install DIMMs with the same CAS latency. For optimum
compatibility, we recommend that you obtain memory modules from
the same vendor. Refer to the DDR2 Qualified Vendors List on the
ASUS web site.
• Due to chipset resource allocation, the system may detect less than
16 GB system memory when you installed eight 2 GB DDR2 memory
modules.
• This motherboard does not support memory modules made up of 128
Mb chips or double-rank x16 memory modules.
• If you are installing only one memory module, install into the blue socket
labeled DIMM_B4. Installing into any other socket will not work.