Asus 1U Rackmount Barebone Server RS160-E3/PS4 - Manual (Page 29)

2 - 1 1 2 - 1 1 2 - 1 1 2 - 1 1 2 - 1 1 A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4
2.5 Expansion slot
The barebone server comes with a riser card bracket installed on the 64-bit
expansion slot. You need to remove the bracket if you wish to install a PCI-X
expansion card.
2.5.1 2.5.1 2.5.1 2.5.1 2.5.1 Installing expansion cards Installing expansion cards Installing expansion cards Installing expansion cards Installing expansion cards
To install a short expansion card:
1. Use a Phillips (cross) screwdriver
to remove the screw that secures
the riser card to the chassis.
3. Remove the screw that secures
the slot metal cover.
4. Install PCI-X cards to the bracket
as shown, then secure the card
with a screw.
2. Firmly hold the riser card bracket,
then pull it up to detach it from
the PCI-X slot on the mother-
board.