KROHNE BM 100A Handbook - Manual (Page 47)

Handbook BM 100 A 47
Step 6
Undo the two screws holding block in the
housing.
Step 7
Disconnect interface socket. Remove display
screen circuit board.
Step 8
Remove the electronics chassis carefully. Step 9
Disconnect the coaxial cable.
Step 10
Use these instructions to mount the new chassis. Care should be taken when putting the electronics
package back into the housing to avoid trapping the coaxial cable between the housing and the rear
cover. Load the old settings saved on a *.dat file using PC-STAR or re-enter information noted on
the configuration record in appendix B.