KROHNE BM 100A Handbook - Manual (Page 6)

6 Handbook BM 100 A
Standard nameplate
Product liability and warranty
The BM 100 A TDR level gauge is designed solely for measuring the distance, level, interface and
volume of liquids, pastes, slurries, solids and particulate materials.
The BM 100 A TDR level gauge does not form part of an overfill protection system as defined in
WHG nor is it concerned by the Pressure Equipment Directive (PED) 97/23/EC.
Special codes and regulations apply to its use in hazardous areas.
Responsibility as to suitability and intended use of these level gauges rests solely with the user.
Improper installation and operation of our level gauges may lead to loss of warranty.
In addition, the "General conditions of sale", found on the back of the invoice and forming the basis
of the purchasing contract, are applicable.
If you need to return the level gauge to the manufacturer or supplier, please refer to the information
given in appendix A.