Servicing – KYORITSU 6011A User Manual
Page 30
― 28 ―
If this tester should fail to operate correctly, return it to your distributor stating
the exact nature of the fault. Before returning the instrument ensure that:-
1．The leads have been checked for continuity and signs of damage.
2．The continuity mode fuse (situated in the battery compartment) has been
checked.
3．The batteries are in good condition.
Please remember to give all the information possible concerning the nature of
the fault, as this will mean that the instrument will be serviced and returned to
you more quickly.
13. SERVICING
SPARE FUSE
SCREW
FUSE
BATTERY
If the instrument will not operate in the loop impedance, PSC and RCD modes,
it may be that the protective fuses fitted on the printed circuit board have blown.
If you suspect that the fuses have failed, return the instrument to your distributor
for service - do not attempt to replace the fuses yourself.
Fig 12