KYORITSU 6315 Quick Manual - Manual (Page 42)

KEW6315 Saved items
KEW6315 40
Saved items
The following data measured on each CH will be saved according to the selected recording method.
Saved items are depending on the selected recording method and wiring system.
REC file REC item
Meas./ Rec. setting
Power +Harmonics +Event
Power
measurement
RMS voltage (line/ phase)
● ● ●
RMS current
Active power
Reactive power
Apparent power
Power factor
Frequency
Neutral current(3P4W)
V/ A phase angle (1st order)
Analog input voltage, 1CH, 2CH
V/A unbalance ratio
1-min Voltage flicker
Short-term V Flicker (Pst)
Long-term V Flicker (Plt)
Capacitance calculation
Active power energy (consumption/ regenerating)
Reactive power energy (consumption) lagging/ leading
Apparent power energy (consumption/ regenerating)
Reactive power energy (regenerating) lagging/ leading
Demand (W/VA)
Target demand (W/VA)
Total harmonic distortion of V(F/R)
Total harmonic distortion of A(F/R)
Harmonics
measurement
Harmonic V/ A(1-50th order)
● V/ A phase angle (1-50th order)
V/ A phase difference (1-50th order)
Harmonic power(1-50th order)
V/ A Change RMS voltage per half-cycle ●
RMS current per half-cycle
Event type
Event detected date&time
●
Event type
Measured values at event detection
Waveform
V/A waveform
●