KYORITSU 2417 - Manual (Page 10)

̶ 8 ̶
① Transformer Jaws
Pick up current flowing through the conductor.
② Jaw Trigger
Operates the transformer jaws. Press to open them.
③ Power/Range Switch
Selects ranges. Also, turns power on. Always turn the switch to
off after use.
④ Data Hold Push Button
Push to freeze a reading and push again to release it. In Data
Hold mode, "H" is displayed on the digital display.
⑤ Frequency Selector Switch
Selects frequency response of 50/60 Hz or up to 1 kHz WIDE.
⑥ Digital Display
Function symbols and decimal point are displayed according to
the Range Switch position.
Fig. 2
⑦ Safety Hand Strap