KYORITSU 2417 - Manual (Page 5)

̶ 3 ̶
 WARNING
● Never attempt to make any measurement if any abnormal
conditions are noted, such as broken case, cracked test leads
and exposed metal parts.
● Do not install substitute parts or make any modification to the
instrument. Return the instrument to Kyoritsu or your distributor
for repair or re-calibration.
● Do not try to replace the battery if the surface of the instrument
is wet.
 CAUTION
● Make sure that the function selector switch is set to an
appropriate position before making measurement.
● Be sure to set the function selector switch to the “OFF”position
after use. When the instrument will not be use for a long period
of time, place it in storage after removing the battery.
This is to avoid damage to the instrument by possible leakage
from the battery.
● Do not expose the instrument to the direct sun, extreme
temperatures or dew fall.
● Placing the instrument in temperatures of 60℃ or higher can
cause the instrument's case to deform and result in operation
failures.