KYORITSU 2417 User Manual
Page 14
Advertising
̶
12
̶
NOTE
●
For more accurate measurements, place the conductor at
the center of the closed jaws.
●
When measuring current on a line or a grounded wire, clamp
onto one conductor only.
(4) When measuring out of balance leakage current, clamp onto
all conductors except a grounded wire as shown in Fig. 4.
Fig. 4
6-2. Frequency Selector Switch
Model 2417 measures AC currents of:
(1) 50/60 Hz fundamental frequency only with the Frequency
Selector Switch set to the 50/60 Hz position ("50/60 Hz" is
indicated on the display), or
(2) 40 Hz to 1 kHz with the Frequency Selector Switch set to the
WIDE position ("WIDE" is indicated on the display)
Advertising