KYORITSU 2417 User Manual
Page 4
̶
2
̶
Following symbols are used on the instrument and in the instruction
manual. Attention should be paid to each symbol to ensure your
safety.
Refer to the instructions in the manual.
This symbol is marked where the user must refer to the
instruction manual so as not to cause personal injury or
instrument damage.
Indicates an instrument with double or reinforced insulation.
DANGER
●
Never make measurement on a circuit above 600V AC.
●
Do not attempt to make measurement in the presence of
flammable gasses, fumes, vapor or dust. Otherwise, the use
of the instrument may cause sparking, which can lead to an
explosion.
●
Transformer jaw tips are designed not to short the circuit under
test. If equipment under test has exposed conductive parts,
however, extra precaution should be taken to minimize the
possibility of shorting.
●
Never open the battery compartment cover when making
measurement.
●
Never try to make measurement if any abnormal conditions,
such as broken Transformer jaws or case is noted.
●
The instrument is be used only in its intended applications
or conditions. Otherwise,Safety functions equipped with the
instrument doesn't work, and instrument damage or serious
personal injury may be caused.