Revo R4CMB-500 - Manual (Page 14)

User’s Manual
8
Select the Finish button to finish the Quick Setup Wizard and
start the Network Setup.
Select the Next button to start the Network Setup Wizard.
NOTE: The Network wizard also can be accessed by
selecting Network Setup in the Main Setup screen. Refer
to the following Advanced Setup section.
Internet Connection
Select whether or not your DVR is connected to the Internet.
LAN Setup
Select between Auto Configuration and Manual Configuration
for network configuration, and then select the Test button to
test the network configuration you selected.
NOTE: Selecting Auto Configuration allows the DVR to
automatically obtain LAN parameters (IP address, Gateway,
Subnet Mask and DNS Server address). Selecting Manual
Configuration allows you to set up LAN parameters manually.
NOTE: The network configuration you set should be tested
by selecting Test, otherwise the Next button will cannot
be selected, and you cannot move to the next step.
 Use DSL/PPPoE Setup: Selecting the box allows you to
set up the DSL network. Entering the ID and password for
DSL connection is required.