Revo R4CMB-500 - Manual (Page 23)

4 Channel Digital Video Recorder
17
 Attach JPEG Image: Check the box if you want to attach the event detected image file to an email.
NOTE: Depending on the model of smart phone, the attached image file might not be displayed properly.
 Event Email Interval: Set the event emailing dwell intervals. The DVR will not send an e-mail during the preset
interval range when the same event is detected.
Push Settings (NETWORK  Push Tab)
 Enable: The DVR can be set up to send a push message
to mobile devices when an event occurs. Selecting the box
enables the Push Notification service.
 Push Server: Displays the push server address.
 Ignoring Time: Set the push ignoring dwell time. The DVR
will not send callback messages during the preset interval
range when the same event is detected.
Schedule Settings (NETWORK  Schedule Tab)

: Adds the notify schedule.
No. – Indicates a schedule number. The higher the number,
the higher its priority. (i.e. The schedule No. “20” has priority
over all others.)
Day – Select the days that the DVR notifies the remote site.
Range – Set the time range that the DVR notifies the remote site.
Notify – Set the notify actions that the DVR will take when the
event is detected.
– Deletes the notify schedule settings.
 Summary Email Interval: Set the interval that you want
the DVR to send a summary email. The DVR will send an
email containing a summary of events detected during the
preset interval range.
 Daily Report Setup …: Set up the daily report of event detection by selecting the
Enable box. Set the reporting time and time range of daily report and select the
cameras for which you want the daily report of motion detection, and the DVR
will send an email of daily report based on the reporting condition you made.