Revo R4CMB-500 - Manual (Page 46)

User’s Manual
V1.0 40
PROBLEM POSSIBLE SOLUTION
The icon displays, however,
the DVR is not recording.
When the DVR is in the Pre-Event recording mode, the yellow and icons display
when there is no event, and the DVR is not recording. The red and icons display
when any event occurs and the DVR starts recording.
IR remote control does not
work properly.
 Check the batteries in the remote control.
 Check that nothing blocks the infrared sensor on the DVR.
 Check the system ID setting for the remote control. See Chapter 2 – Installation &
Configuration, Advanced Setup – System Setup for details.
While upgrading the system, the
DVR keeps rebooting and the
upgrade fails. If the current system version is higher than the upgrade package file version, you should
reset the DVR first using the Factory Reset. When using the Factory Reset, you will lose
any settings you have saved.
SPECIFICATIONS
VIDEO
Signal Format NTSC
Video Input 4 RJ-12 inputs, 1 Vp-p, auto-terminating, 75 Ohms
Monitor Outputs
Composite: One (RCA), 1 Vp-p, 75 Ohms
LCD: 10.1"
Playback/Record Speed
(images per second)
120/120ips (NTSC)
INPUTS/OUTPUTS
Network Connectivity 10/100 Base Ethernet
Audio Input RJ-12 Input: 4 Line In
Audio Output 1 Speaker (Built-In)
IR Port 1 Remote Control (Optional)
CONNECTORS
Video/Audio Input 4 RJ-12 (12V , Max. 310mA)
Monitor Output Composite: 1 RCA
Ethernet Port RJ-45
USB Port 2 on side panel (2.0)
STORAGE
Primary Storage SATA hard disk drive (2.5")
Backup Storage USB flash drive
GENERAL
Dimensions (W x H x D)
11.0" x 2.4" x 7.4" (280mm x 61mm x 188mm)
11.0" x 1.2" x 7.4" (280mm x 31mm x 188mm) without Stand
Unit Weight 2.4 lbs. (1.1kg)
Shipping Weight 11.7 lbs. (5.3kg)
Shipping Dimensions
(W x H x D)
15.1" x 7.6" x 12.6" (383mm x 194mm x 319mm)
Operating Temperature 41°F to 104°F (5°C to 40°C)
Operating Humidity 0% to 90%
Power 12V , 2.2A (Adaptor: 100-240 V~, 50/60Hz, 1.5A, 12V , 5A
Power Consumption Max. 50W
Approval FCC