Revo R4CMB-500 - Manual (Page 18)

User’s Manual
12
NOTE: Even after changing the DVR settings by importing saved settings, the time-related settings (Date/Time,
Time Zone and Daylight Saving Time) will NOT be changed.
CAUTION: The USB device must be FAT16 or FAT32 format.
 Show System Log
…: Displays the system logs (up to 5,000
from the latest). The icon will be displayed in the last column
for system activities of remote sites. To export the system log
information, connect the USB device to the DVR. Select
Export
… and press the button, and the System Log Export
screen displays. Select the box beside File name and press the
button. A virtual keyboard allows you to enter the file name.
Log Message Log Message Log Message
Boot Up Setup Export Cancel Backup Cancel (Local/Remote)
Upgrade (Local) Schedule On Backup Failure (Local/Remote)
Upgrade Failure (Local) Schedule Off Time Change (Local)
Setup Begin Clear All Data (Local) Time Zone Change (Local)
Setup End Format Disk DISK FULL
Setup Imported Search Begin (Local/Remote) Shutdown
Setup Import Fail Search End (Local/Remote) Restart
Setup Exported Backup Begin (Local/Remote) DISK# BAD
Setup Export Fail Backup End (Local/Remote)
 Change Password …: Changes the password.
 System Shutdown: Shuts the system down.
Date/Time Settings (SYSTEM  Date/Time Tab)
 Date: Set the system date, and select the date format.
 Time: Set the system time, and select the time format.
 Time Zone: Select your time zone.
 Use Daylight Saving Time: Selecting the box sets the
system to use daylight saving time.
NOTE: The clock will not start running until you have
selecting the Save button.