West Control Solutions KS 94 - Manual (Page 31)

10.11 AUX: Additional functions
The interface function and operating frequency for suppression of interference on inputs are
configured.
10.11.1 COM (serial interface)
Mainconfiguration:
(IS01745, PROFIBUS)
Only with HW option B
Prot Baud Addr
(Interface protocol) (Baud rate)* (Interface address)
0: IS0174 00: not adjustable
01: 2400 Bd
02: 4800 Bd
03: 9600 Bd
04: 19200 Bd
ISO1745
0 ... 99 (default 0)
PROFIBUS-DP
1...128 (default 128)
*PROFIBUS: automatic baud rate detection
10.11.2 Hardware
The hardware-related functions are configured.
Main configuration:
Operating frequency for suppression of interference on inputs is configured.
Frq (Mains frequency)
0: 50 Hz
1: 60 Hz
10.11.3 Forcing signal input
All configuration for forcing ar only
present by PROFIBUS-DP
FINP1 FINP3 FINP4 FINP5 FINP6
(Forcing input 1) (Forcing input 3) (Forcing input 4) (Forcing input 5) (Forcing input 6)
0: Controller value
1: Forcing
0: Controller value
1: Forcing
0: Controller value
1: Forcing
0: Controller value
1: Forcing
0: Controller value
1: Forcing
10.11.4 Forcing digital input
10.11.5
Fdi1 Fdi2 Fdi4
(Forcing digital input 1) (Forcing digital input 2) (Forcing digital input 4)
0: Controller value
1: Forcing
0: Controller value
1: Forcing
0: Controller value
1: Forcing
Configuration
4 33 Operating instruction KS9
C.900
COM
Schnittstelle
0.03.0