Console functions, Channel strip – Audient ASP4816 - Compact Analogue Recording Console User Manual

Page 21

Advertising
background image

Page -21-

© Audient Ltd

Console functions.

CHANNEL STRIP

ROUTING and

AUXILIARIES

The routing section takes the signal

from the SF path and routes it to

the bus outputs which in turn are

usually connected to the inputs of

a DAW or other recording device.

Buses 1 to 8 also have a parallel

path and feed the 8 sub-groups.

These can be used to pre mix

channels together for final mix

down or as sends to a DAW or

other recording device.

There are 16 bus outputs accessed

by 8 routing buttons and a SHIFT

button.

Routing can be to multiple outputs

and if odd and even outputs are

selected panning can be used to

place the signal within a stereo

image.

With mulitple buses available it

is possible to achieve a variation

on the multi-bus compression

techniques made popular by mix

engineers like Michael Brauer.

(See www.mbrauer.com/articles).

The LF switch moves the routing

from the SF path over to the LF

path and can be useful for track

bouncing. If PAN is down and

routing is again selected for odd

and even buses then the post fade

post pan LF signal is sent to the

bus outputs selected.

There are 8 auxiliary outputs. The

Auxiliaries can be switched to the

SF path.

Cue A and B work in the same

manner as the other auxiliaries

but are intended mainly for use

as sends to the FOLDBACK

system.

1 ROUTING SWITCHES

select the bus outputs that the

SF signal is sent to. The first

eight switches also route to the

8 sub-groups

2 SHIFT gives access to bus

outputs 9-16.

3 PAN allows the signal to be

panned across odd and even

buses.

4 LF replaces the SF signal

being sent to the routing

switches with the signal from

the LF signal path.

5 LEVEL adjusts the level sent

to an auxiliary output.

6 SF allows the signal feeding

the auxiliary to be taken from

the SF signal path.

7 PRE allows the auxiliary

signal to be taken pre fader

instead of the normal situation

where it is taken post fader.

8 CUE A and B are identical in

operation to the others but can

be individually switched into

the SF path.

Advertising