Audient ASP4816 - Compact Analogue Recording Console - Manual (Page 38)

Page -38- © Audient Ltd
STUDIO/ FOLDBACK
CONNECTORS
These are the XLR connectors for
the Studio Loudspeaker and the
two foldback outputs. Each output
is stereo, having a left and right
connector.
The console does not contain any
power amplification and these
outputs should be connected into
a suitable power amplifier for
the loudspeakers or headphones
in use.
The speakers may of course be self
powered in which case connection
should be made to the inputs on the
loudspeakers.
1 STUDIO LOUDSPEAKER .
These carry the outputs to the
studio loudspeaker system.
The output depends upon the
selection made on the control
surface of the console.
2 FOLDBACK A output.
Foldback is normally used
as a feed to headphones. The
output depends upon the
selection made on the control
surface of the console.
3 FOLDBACK B output.
Foldback is normally used
as a feed to headphones. The
output depends upon the
selection made on the control
surface of the console.
Console functions.
MASTERS