Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 28)

2 Tap Historical Interval Data
Result: The Select days to collect screen opens.
3 Tap the number of days of historical interval data to
collect: 7, 14, 30, 60 or All Then tap Select
Figure 37: days to collect
4 If the Test Circle Selection screens display, select the appropriate unit of measure for the meter on the account:
Tap the unit of measure (cubic feet, gallons, cubic meters) and then select the registration and reading resolution
from the available list for the selected meter Use the scroll bar to navigate through the list Examples of these screens
are shown in Figures 38 and 39
5 Choose the test circle
Figure 38: Select cubic Feet, gallons or cubic Meters
Figure 39: Select registration and reading resolution
6 Tap Select
Result: The historical data collection process starts
automatically. you do not need to tap Collect.
”In Process“ is shown on the work Items screen next to
the historical Interval data field. See Figure 40.
Figure 40: historical data extraction started
REAdINg A ROuTE
Page 28 April 2014 ORION® Field Application for Trimble® Ranger 3