Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 91)

Recovering a Backup Route Unload File
Once a route file is unloaded, a backup route file can only be accessed using a security code and the following steps
IMNOOTAO I
A route must be loaded on the handheld before starting this process. Use an expendable route file because the loaded
route will be lost during the recovery process.
1 Go to Windows Start> Badger Field Applications> ORION Field Application
2 Tap to open ORION Field Application
3 Verify the time and date and then tap OK
4 At the Copyright screen, tap Continue
5 Tap Read Route
6 At the Pin/User ID screen, use the keypad to enter the code Call Badger Meter Technical Support for the code
7 Tap OK after you enter the code
8 A screen displaying that last three route unload files opens Tap the route you want to recover
9 A message displays asking if you want to replace the current route with the backup route Tap Yes to replace the
current route with the backup route
10 The backup route file screen displays briefly and the Main Menu opens
Result: The backup route is now available and may be unloaded. For help, see "unloading a Route" on page 87 .
Route Unload Error
When trying to unload a route from the handheld, the memory stick should be empty – no other route info should be on the
stick If there is another route, the unload process will not automatically occur
If you encounter this error, delete the files on the memory stick that are located in the TO_CONNECT folder
To delete the files on the memory stick
1 Insert the memory stick into the USB port on a laptop or other computer to view the files
2 Open the TO_CONNECT folder
3 Select all the files and press the Delete key on the keyboard
4 Remove the memory stick from the computer
When the files are deleted, the memory stick can be used to unload the route on the handheld
TROuBLEShOOTINg
Page 91 April 2014 ORION® Field Application for Trimble® Ranger 3