Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 82)

STATUS CODES
Status codes are displayed on several of the screens within the software The following is a list of status codes and
their descriptions
Status Code Description
CR Cover Removal (gas only)
EE Encoder/Register Error
IR Programmed via IR – endpoint was programmed using the infrared cable
LB Low Battery
LK Leak
MMI Mobile Mode Indicator
NU No Usage
REV Reverse Flow (encoder or gas only)
T Tamper
VALID COM PORTS
The following is a list of valid COM ports See "hardware" on page 49 to adjust the COM port settings
Technology COM Port
External ORION CE or VersaProbe COM1
GPS - Ranger 3 only COM2
Not applicable COM3
External ORION ME COM4
Not applicable COM5
Not applicable COM6
Internal ORION CE or ME COM7
Bluetooth VersaProbe COM8
Bluetooth VersaProbe COM9
ORION In Home Display COM10
STATuS cOdES
Page 82 April 2014 ORION® Field Application for Trimble® Ranger 3