Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 19)

Meter Information
Field Label
Displays For
Description Endpoint Technology Encoder Type
Meter Size and
Type
ME, SE ELCD, HRE,
ENC, RTR
The size and type of the meter for which the encoder
was programmed
Unit of Measure ME, SE ELCD, HRE,
ENC, RTR
The unit of measure as defined by the encoder: cubic meters,
cubic feet, gallons, imperial gallons or liters
Encoder Type ME, SE ELCD, HRE, ENC The encoder protocol
Dials ME, SE ELCD, HRE, ENC The encoder dial resolution as reported from the encoder
Reverse Flow
Total
ME, SE ELCD The total reverse flow units measured by the encoder or the
E-Series meter
Drive Circle ME, SE, CE Gas Displays after initial read for gas endpoints only Provides access
to a read-only screen displaying the possible drive circles for the
gas endpoint
Direction ME, SE Gas The direction for the drive gear
Pressure Comp ME, SE, CE Gas The gas pressure factor
Flow Rate Study (ORION ME and SE only)
Field Label
Displays For
Description Endpoint Technology Encoder Type
Start Date Time ME, SE All Date and time the Flow Rate Study was started Fills when Get
button is selected
Intervals ME, SE All The number of five-minute Intervals collected during the Flow Rate
Study Fills when Get button is selected
Min Max Total ME, SE All The Minimum and Maximum flow, and the Total counts collected
The fields fill when Get button is selected
GPS Location (ORION ME and SE only)
Field Label
Displays For
Description Endpoint Technology Encoder Type
Latitude ME, SE All Geographic coordinate specifying north-south position of
the endpoint
Longitude ME, SE All Geographic coordinate specifying east-west position of
the endpoint
Advanced Endpoint Functions (ORION ME and SE only)
Field Label
Displays For
Description Endpoint Technology Encoder Type
Battery Status ME, SE All Visual indicator of the endpoint battery status
IR PROGRAMMING
Page 19 April 2014 ORION® Endpoint Utility