Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 16)

On the ORION endpoint, there is a small triangle printed on the lower side of the housing
4 Align the two triangles and push the bracket and endpoint together
5 With the installation bracket in one hand and the housing in your other hand, hold the bracket still and twist the
housing approximately ¼ turn clockwise until it clicks and locks into place
6 To program the ORION, access the Infrared communications port on the bottom of the ORION by performing steps 4
and 5 in reverse Once the endpoint is programmed, it can be reinstalled in the bracket by again completing
steps 3…5
ORION removed from the Remote Installation Bracket allowing access to IR communications port
Triangle
ORION® Gas Endpoints, Remote Endpoint for Gas Meters and Volume Correctors with Pulsed Outputs
Page 16 July 2013