Product unpacking and inspection, License requirements, Identification and label information – Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities User Manual

Page 6: Product unpacking and inspection 6, License requirements 6, Identification and label information 6

Advertising
background image

PRODUCT UNPACKING AND INSPECTION

NOTE:

N

If damage to the shipping container is evident upon receipt, request the carrier to be present when the

product is unpacked

Carefully open the shipping package, follow any instructions that may be marked on the exterior Remove all cushioning

material surrounding the product and carefully lift the product from the package Retain the package and all packing

material for possible use in reshipment or storage
Visually inspect the product and applicable accessories for any physical damage such as scratches, loose or broken parts, or

any other sign of damage that may have occurred during shipment

NOTE:

N

If damage is found, request an inspection by the carrier’s agent within 48 hours of delivery and file a claim with the

carrier

A claim for equipment damage in transit is the sole responsibility of the purchaser

LICENSE REQUIREMENTS

This device complies with Part 15 of FCC Rules Operation of this device is subject to the following conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation

In accordance with FCC Regulations, “Code of Federal Regulations” Title 47, Part 2, Subpart J,

Section 1091, transmitters (endpoints) pass the requirements pertaining to RF radiation exposure.

However, to avoid public exposure in excess of limits for general population (uncontrolled

exposure), a 12 CM distance between the transmitter (endpoint) and the body of the user must be

maintained during testing.

No FCC license is required by a utility to operate an ORION meter reading system
This device complies with Industry Canada license-exempt RSS standard(s) Operation is subject to the following two

conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference

that may cause undesired operation of the device Le présent appareil est conforme aux CNR d'Industrie Canada applicables

aux appareils radio exempts de licence L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas

produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est susceptible d'en compromettre le fonctionnement

Any changes made, but not approved by Badger Meter, can void the user’s authority to operate the equipment

IDENTIFICATION AND LABEL INFORMATION

The ORION remote endpoint is packaged in a 3-1/2" x 6-1/4" gray housing that includes an external, three-conductor wire
Certification markings are noted on the product label Label markings include:

• Serial number and bar code plus product description
• FCC identification
• Certification markings

ORION® Gas Endpoints, Remote Endpoint for Gas Meters and Volume Correctors with Pulsed Outputs

Page 6

July 2013

Advertising
This manual is related to the following products: