Alternative pulse source connections, Program the orion remote endpoint, Alternative pulse source connections 21 – Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities User Manual
Page 21: Program the orion remote endpoint 21
ALTERNATIVE PULSE SOURCE CONNECTIONS
The ORION remote endpoint is compatible with most switch-closure pulse devices Use the following ORION remote
endpoint polarity descriptions along with the instructions from the alternating pulse source to determine the correct
wiring scheme
Badger ORION Remote Endpoint
• Red Wire - Positive Terminal (+)
• Black Wire - Negative Terminal (-)
• Green Wire - Negative Terminal (-)
PROGRAM THE ORION REMOTE ENDPOINT
Badger Meter uses a handheld programmer/data collector system to process and display screens
Please reference the programming guide for ORION gas endpoints and the user manual for the handheld system,
Trimble® Ranger X (ORI-IOM-52-EN) or Trimble Ranger 3 (ORI-IOM-64-EN) All are available at
Trimble Ranger
and IR Read Head
and Cable
Installation Manual
Page 21
July 2013