Check for updates, Service and support, Disclaimer of warranty – Crystal nVision Lab Reference User Manual

Page 17

Advertising
background image

Service and Support

15

CrystalControl Operation Manual

Check for updates…

CrystalControl also has the ability to look out on the web for firmware updates both automatically and manually. This automatic survey will happen every
time you open CrystalControl if the ‘Automatically check for firmware and software updates ‘ button is checked. However if you want to manually survey at any
time you may use the ‘Check for Updates’ to achieve the same result.

serviCe anD suppOrt

Phone . . . . . . . . . . . . . . . . . . . . . . . . . . (805) 595-5477

Toll-Free . . . . . . . . . . . . . . . . . . . . . . . . (800) 444-1850

Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (805) 595-5466

Email . . . . . . . . . . . . . . . . . . . . . . . . . . .

[email protected]

Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

crystalengineering.net

If calling, have ready the model number, serial number, date of purchase, and reason for return. You will receive instructions for returning the device to
Crystal Engineering.

DisClaiMer Of warranty

CRYSTALCONTROL AND THE CORRESPONDING PRESSURE RECORDER (COLLECTIVELY “PRODUCT”) IS PROVIDED “AS IS.” CRYSTAL ENGINEERING CORPORATION
DOES NOT AND CANNOT WARRANT THE PERFORMANCE OR RESULTS PURCHASER MAY OBTAIN BY USING THE PRODUCT. CRYSTAL ENGINEERING CORPORA-
TION MAKES NO PROMISES, REPRESENTATIONS, OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE PRODUCT’S CONDITION, ITS
CONFORMITY TO ANY REPRESENTATION OR DESCRIPTION, THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, ANY NEGLIGENCE, AND ITS MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR USE.

Good data processing procedure dictates that any Product be thoroughly tested with non-critical data before relying on it. The purchaser must assume the
entire risk of using the Product. ANY LIABILITY OF CRYSTAL ENGINEERING CORPORATION FOR A DEFECTIVE PRODUCT WILL BE LIMITED EXCLUSIVELY TO
REPLACEMENT OF PURCHASER’S COPY OF THE PRODUCT WITH ANOTHER COPY OR, IF SO ELECTED BY CRYSTAL ENGINEERING CORPORATION IN ITS SOLE DIS-
CRETION, REFUND OF THE INITIAL AMOUNT PAID BY PURCHASER TO CRYSTAL ENGINEERING CORPORATION FOR THE PRODUCT. IN NO EVENT WILL CRYSTAL
ENGINEERING CORPORATION OR ITS SUPPLIERS BE LIABLE TO PURCHASER FOR ANY CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES, INCLUDING ANY
LOST PROFITS OR LOST SAVINGS, EVEN IF CRYSTAL ENGINEERING CORPORATION WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM
BY ANY THIRD PARTY.

Advertising
This manual is related to the following products: