Operating instructions, Navigating in crystalcontrol – Crystal nVision Lab Reference User Manual
Page 4
Operating Instructions
2
CrystalControl Operation Manual
—
Operating instruCtiOns
CrystalControl will automatically detect your nVision Reference Recorder when connected. If no nVision is found check cables and verify that the recorder is
turned on. Click Find Gauge to reestablish communications.
Click
Select Gauge
.
—
navigating in CrystalCOntrOl
CrystalControl is organized into three major functions: configuration settings (Config), data viewing and archiving (DataViewer), and Tools to set your data
storage locations and product update strategies.
•
Config
allows configuration or setting changes to the nVision platform, and the Upper, Lower, and BARO modules. Each appropriate platform or module can
be selected for modification from the left-hand tabs. Click
Update Gauge
to implement your selections to the recorder.
•
DataViewer
allows quick viewing of live recording or previously recorded data runs. Additional features such as zooming, changing units, and exporting or
archiving to .xls/.csv/.pdf file formats are also available.
Config settings tabs
Functions tabs
Update Gauge button
Tools button
Navigate through CrystalControl with the function tabs.