Crystal nVision Lab Reference - Manual (Page 8)

Confi g Function Tab  6
CrystalControl Operation Manual
Module: BARO
The BARO module requires CPLD version 6 or greater to operate properly. If you have CPLD 5 or earlier the nVision must come to the factory for updating. This
information may be found on the nVision Confi g tab.
• Enable Absolute Mode: You may choose to disable your installed BARO module to save battery power or to prevent the user from accessing the absolute
pressure mode. If the User Unit is created using absolute readings, then the BARO must be enabled for the User Unit to be functional.
• Edit Calibration Data Button: This section includes a Calibration Wizard to help calculate the optimum off set and userspan values.
Typical view of BARO Module features in CrystalControl.