Kaman 8000 Enclosures - Manual (Page 20)

20
b
Using the indicator pin orient the selector card so that the desired
voltage is readable at the bottom. Orient the indicator pin to point up
when the desired voltage is readable at bottom ( note that when indicator
pin is fixed, successive voltages are selected by rotating the card 90o
clockwise). See fig. 10 for voltage selector orientation.
c Insert voltage selector card into housing with printed side of card facing
toward IEC connector and edge containing the desired voltage first.
Replace cover and verify that indicator pin shows the desired voltage.
fig. 10 -- Voltage Selector Card Orientation;