Kaman 8000 Enclosures - Manual (Page 42)

42
Note: Pushing both the "SET" and "ENTER" button at the same
time always causes the indicator to recalibrate itself to the
given input and what is on the display at that moment.
As a protective measure, if scaling changes are made and
not terminated this way no recalibration will occur,
previous values will remain.
Note: As a further protective measure, the "SET" and "ENTER
buttons are not functional unless the PROCESS/SCALING
switch is in the SCALING position.
fig. 28 -- Button Function Legend;
Table 5 -- MCD-8000 Error Message Table;