Kaman 8000 Enclosures - Manual (Page 31)

31
Back Panel Sensor Inputs
The back panels are configured with holes for panel mounted SMA connectors for coaxial
sensor inputs. Depending on the number and type of measuring channels some of the holes
may be plugged. The two rows of sensor inputs are marked A (or `Active') and B (or
`Inactive')(for dual coil or differential sensor configurations) with a number between the A/B
sensor inputs corresponding to the particular measuring channel input. For example, when
installing the unit the sensor marked `A' or `Active' designated for channel 2 should be mated
with the SMA connector on the back panel in row A, column 2. If the sensor is a single coil
sensor, row B will be plugged. Figures 3, 5, and 7 show the back panel configurations for the 3
standard rack mounted enclosure types. If additional measuring channels are added in the
field you must use coaxial cables on the sensor inputs.
fig. 17 -- Back Panel Sensor Inputs;