Milestone Basis+ 6.5 User Manual
Page 60
Milestone XProtect Basis+ 6.5; Administrator’s Manual
www.milestonesys.com Page
60
Audio Source Administration
You access the Microphone Settings window from the Administrator window (see page 26): Select a
microphone in the Administrator window’s Device Manager section, then click the Settings button.
•
Device name: Displays the name of the microphone. If required, you are able to overwrite
the existing audio microphone name with a new one.
•
Enabled: Lets you enable/disable use of the microphone.
Tip: You can also enable/disable an audio source in the Administrator window: Right-click the
required audio source in the Administrator window’s Device Manager section, then select Disable or
Enable from the menu that appears.
Note: On some devices, a microphone can also be enabled/disabled on the device itself, typically
through the device’s own configuration web page. If a microphone on a device does not work after
enabling it in the Administrator application, you should thus verify whether the problem may be
due to the microphone being disabled on the device itself.