Milestone Basis+ 6.5 - Manual (Page 65)

Milestone XProtect Basis+ 6.5; Administrator’s Manual
Field, Check Description
Box
Online Check the Online box when you want to set or clear online periods for the
selected camera.
Speedup Check the Speedup box when you want to set or clear when the camera
should always/never speedup recording.
Note: The Speedup check box is only available if you have enabled speedup in
the Camera Settings for [Device Name] [Camera Name] window (see page
39).
E-mail Check the E-mail box when you want to set or clear periods with motion- or
database-related e-mail alerts for the selected camera. Such alerts can
automatically be sent to one or more recipients when motion or database
events are detected.
Note: In order to be able to use e-mail alerts, the e-mail alert feature must
have been set up in the E-Mail setup window (see page 70).
Start event When you set an Online period, you will be asked whether you want the
selected camera to transfer video to the XProtect Basis+ software
continuously within the specified period (Always), or only when an event
occurs within the specified period (On Event).
If using On Event, the Start event list lets you select the required start event.
Note: The use of event-based online periods requires that events have been
defined. Read more about events in About Input, Events & Output ... on page
73.
Stop event When you set an Online period, you will be asked whether you want the
selected camera to transfer video to the XProtect Basis+ software
continuously within the specified period (Always), or only when an event
occurs within the specified period (On Event).
If using On Event, the Stop event list lets you select the required stop event.
Note: The use of event-based online periods requires that events have been
defined. Read more about events in About Input, Events & Output ... on page
73.
Camera/Alert Scheduler Window’s Calendar Section
The Camera/Alert Scheduler window’s calendar section lets you specify exact periods of time for
each option for each camera selected in the window’s Camera list.
Set and Clear Modes
Depending on your selection in the Mode list, you Set or Clear periods in the
calendar. Your selection is indicated by your mouse pointer turning into
either a pencil (Set) or an eraser (Clear) when inside the calendar section.
www.milestonesys.com Page 65 Scheduling