ProMariner Combi Inverter Charger - Manual (Page 11)

I n s t a l l a t i o n G u i d e l i n e s
18 17
Installation
I n s t a l l a t i o n G u i d e l i n e s
Installation
3) Disconnect the short pigtail from inside the TruePower Combi.
1. Network-Type Cable Connection
Network-Type Cable Connection DETAIL
1) Install the provided dummy panel in the reverse order in which the remote panel was removed.
1) Locate remote panel and prepare an appropriately sized mounting location (75mm x 44mm
or 3” x 1-3/4”). A connector and extension cable are provided. The extension cable is to be
connected to the external connection as indicated in the FEATURES section.