Sterlco SGBD Series Batch Gravimetric Blenders - Manual (Page 27)

BLN1-600 Chapter 2: Functional Description 27 of 110
Regrind Auger Metering (R.A.M.) Hopper
Used for feeding difficult regrind materials.
Figure 15: Typical R.A.M. Hopper Blender Configuration
Additive Feeder Hopper
Used for feeding pelletized additive, typically used on blenders with more than six
components.
Figure 16: Typical Additive Feeder Configuration
Take-off Compartments
Allows material to be metered into a vacuum conveying system.