State GTS-110-NI - Manual (Page 34)

Normal Operation
34 │
Page
 DO NOT set to 185 °F if you use your water heater in a recirculation
system. This will cause damage to the heater and void the warranty. (This
temperature setting is only available on the 510 (T‐D2) models.)
 DO NOT adjust the left bank of dipswitches. For the 510 (T‐D2) models.
 Turn off the power supply to the water heater before changing the
dipswitch settings.
 Only change the switches with the dark squares. The dark squares indicate
which direction the dipswitch should be set to.
510 (T‐D2) models
110 (T‐KJr2) and 310 (T‐K4) models
510 (T‐D2) models
110 (T‐KJr2) and 310 (T‐K4) models
Location of the bank of dipswitches on the computer board
WARNING
Dipswitches
Right bank of
dipswitches
Left bank of
dipswitches
7‐Seg. LED
‐Dipswitch settings for each temperature on the computer board‐
(45 OFF
ON
C)
113 F 1 2 3 4 5 6 7 8
OFF
ON
1 2 3 4 5 6 7 8
(50 C)
122 F
DEFAULT
(55 OFF
ON
C)
131 F 1 2 3 4 5 6 7 8
(60 OFF
ON
C)
140 F 1 2 3 4 5 6 7 8
Temperature Settings
Temperature Settings <Right bank of dipswitches>
(45 C)
113 F
(40 OFF
ON
C)
104 F
(70 C)
158 F
(60 C)
140 F
(85 C)
185 F
(80 C)
176 F
1 2 3 4 5 6
OFF
ON
1 2 3 4 5 6
OFF
ON
1 2 3 4 5 6
OFF
ON
1 2 3 4 5 6
OFF
ON
1 2 3 4 5 6
OFF
ON
1 2 3 4 5 6
(45 C)
113 F
OFF
ON
1 2 3 4 5 6
(50 C)
122 F
DEFAULT
OFF
ON
1 2 3 4 5 6
(55 C)
131 F
OFF
ON
1 2 3 4 5 6